Product Description
Design Hardware’s V-82-F US26D Entry Flat Lever Lock 2-3/4" Backset and KA-5 ASA Strike:
-
Locking Mechanism: Turn/Push button locking. Pushing and turning the button locks the outside lever, requiring the use of a key until the button is manually unlocked. Pushing the button locks the outside lever until unlocked with a key or the inside lever is turned. The deadlocking latchbolt is operated by the inside lever at all times.
-
ANSI Standards: Meets and exceeds ANSI – A156.2, Series 4000, Grade 2 standards.
-
UL Listings: UL Listed for “A” Label 3 Hour Fire Doors.
-
ADA Compliance: Meets ADA and ANSI A117.1 accessibility codes.
-
Lock Chassis: Steel, Zinc dichromated chassis for corrosion resistance.
-
Clutching: Clutching levers are standard for vandal resistance on locking functions.
-
Trim: 5″ Solid zinc diecast levers, 3″ wrought brass roses (will not cover thru bolt holes).
-
Lever Return: Anti-sag mechanism with independent lever return springs to prevent lever sag.
-
Handing: Non-Handed – Completely reversible.
-
Backset & Latchface: 2 3/4″ backset standard, with 1 1/8″ x 2 1/4″ latchface with self-adjusting front for square or beveled edge doors.
-
Latchbolt: Stainless Steel Latchbolt with 1/2″ projection, deadlocking on keyed functions.
-
Cylinder Options: 6 Pin Solid Brass Cylinder, C Keyway, 2 Silver Nickel Keys standard. Optional keyways: 11 popular competitor keyways available with replacement cylinders (extra charge applies). Note: Replacement cylinders are supplied loose and not installed in locksets.
-
Strikes: 4 7/8″ x 1 1/4″ ASA (standard) – 2 3/4″ T strike & Full lip strike w/ 1/4″ R.C available.
-
Door Prep: ANSI A115.2 – 2 1/8″ crossbore.
-
Door Thickness: Factory Set for 1 3/4″ Door thickness, can be adjusted to fit 1 3/8″ to 2″ thick doors.
-
Standard Lever Design: Flat.
-
Finish: US26D Brushed/Satin Chrome.
-
Fasteners: Combination screws for wood or metal doors & frames.
-
Warranty: Limited Lifetime Warranty.